APPLICATION
DOT 3 BRAKE FLUID is recommended for a re-Filler top-up of brake and clutch systems in passenger cars, 4WDs, motorcycles, light, and Heavy Duty commercial vehicles, mining, and construction, and agricultural equipment that require non-petroleum-based DOT 3 brake & clutch hydraulic fluid.
DOT 3 BRAKE FLUID is suitable for use where the vehicle manufacturer specifies DOT 3 brake fluid.
DOT 3 BRAKE FLUID can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Guard Brake Fluid DOT 3 prior to the first fill or before refilling the system.
DOT 3 BRAKE FLUID should be changed according to the manufacturer's service Specifications.
PLEASE NOTE
- Do not mix this product with SILICONE DOT 5 or MINERAL type brake fluids.
- Not mixable with Silicone type assembly compounds
- Avoid contact with skin, varnish & paint. If skin contact occurs wash with water.
CAUTION
Brake Fluids are naturally hygroscopic and will absorb water from the air. This will lower the effectiveness of the product.
